Established in 2020 Wednesday, June 12, 2024


Combustion powers bug-sized robots to leap, lift and race
This combustion-powered quadrupedal robot is capable of multi-gait movements and can leap 60 centimeters in the air, or roughly 20 times its body length. Image courtesy: Cornell University.



ITHACA, NY.- Call it the big bang for bug-sized robots.

Cornell researchers combined soft microactuators with high-energy-density chemical fuel to create an insect-scale quadrupedal robot that is powered by combustion and can outrace, outlift, outflex and outleap its electric-driven competitors.

The group’s paper, “Powerful, Soft Combustion Actuators for Insect-Scale Robots,” was published Sept. 14 in Science. The lead author is postdoctoral researcher Cameron Aubin, Ph.D. ’23.

The project was led by Rob Shepherd, associate professor of mechanical and aerospace engineering in Cornell Engineering, whose Organic Robotics Lab has previously used combustion to create a braille display for electronics.

As anyone who has witnessed an ant carry off food from a picnic knows, insects are far stronger than their puny size suggests. However, robots at that scale have yet to reach their full potential. One of the challenges is “motors and engines and pumps don’t really work when you shrink them down to this size,” Aubin said, so researchers have tried to compensate by creating bespoke mechanisms to perform such functions. So far, the majority of these robots have been tethered to their power sources – which usually means electricity.

“We thought using a high-energy-density chemical fuel, just like we would put in an automobile, would be one way that we could increase the onboard power and performance of these robots,” he said. “We’re not necessarily advocating for the return of fossil fuels on a large scale, obviously. But in this case, with these tiny, tiny robots, where a milliliter of fuel could lead to an hour of operation, instead of a battery that is too heavy for the robot to even lift, that’s kind of a no brainer.”

While the team has yet to create a fully untethered model – Aubin says they are halfway there – the current iteration “absolutely throttles the competition, in terms of their force output.”

The four-legged robot, which is just over an inch long and weighs the equivalent of one and a half paperclips, is 3D-printed with a flame-resistant resin. The body contains a pair of separated combustion chambers that lead to the four actuators, which serve as the feet. Each actuator/foot is a hollow cylinder capped with a piece of silicone rubber, like a drum skin, on the bottom. When offboard electronics are used to create a spark in the combustion chambers, premixed methane and oxygen are ignited, the combustion reaction inflates the drum skin, and the robot pops up into the air.

The robot’s actuators are capable of reaching 9.5 newtons of force, compared to approximately 0.2 newtons for those of other similarly sized robots. It also operates at frequencies greater than 100 hertz, achieves displacements of 140% and can lift 22 times its body weight.

“Being powered by combustion allows them to do a lot of things that robots at this scale haven’t been able to do at this point,” Aubin said. “They can navigate really difficult terrains and clear obstacles. It’s an incredible jumper for its size. It’s also really fast on the ground. All of that is due to the force density and the power density of these fuel-driven actuators.”

The actuator design also enables a high degree of control. By essentially turning a knob, the operator can adjust the speed and frequency of sparking, or vary the fuel feed in real time, triggering a dynamic range of responses. A little fuel and some high-frequency sparking makes the robot skitter across the ground. Add a bit more fuel and less sparking and the robot will slow down and hop. Crank the fuel all the way up and give it one good spark and the robot will leap 60 centimeters in the air, roughly 20 times its body length, according to Aubin.

“To do all those multi-gait movements is something that you don’t typically see with robots at this scale,” Aubin said. “They’re either crawlers or jumpers, but not both.”

The researchers envision stringing together even more actuators in parallel arrays so they can produce both very fine and very forceful articulations on the macro scale. The team also plans to continue work on creating an untethered version. That goal will require a shift from a gaseous fuel to a liquid fuel that the robot can carry on board, along with smaller electronics.

“Everybody points to these insect-scale robots as being things that could be used for search and rescue, exploration, environmental monitoring, surveillance, navigation in austere environments,” Aubin said. “We think that the performance increases that we’ve given this robot using these fuels bring us closer to reality where that’s actually possible.”

Co-authors include E. Farrell Helbling, assistant professor of electrical and computer engineering; Sadaf Sobhani, assistant professor of mechanical and aerospace engineering; Ronald H. Heisser, Ph.D. ’23; postdoctoral researcher Ofek Peretz; Julia Timko ’21 and Kiki Lo ’22; and Amir Gat of Technion–Israel Institute of Technology.

The research was supported by the Air Force Office of Scientific Research; the National Science Foundation; and the Office of Naval Research.







Today's News

September 19, 2023

An implantable device could enable injection-free control of diabetes

Researchers discover possible new treatment for triple-negative breast cancer

Buried ancient Roman glass formed substance with modern applications

Researchers use liquid metal and laser ablation to create stretchable miniature antennas

How Hessian researchers unveil the venomous secrets of European snakes

Genomes of enigmatic tusk shells provide new insights into early molluscan evolution

Uncovering the potential health benefits of alcoholic beverages derived from spent coffee grounds

Gauging the key role animals can play in monitoring climate change

Chemists solve long-standing polymer science puzzle

The pace of climate-driven extinction is accelerating, a UArizona-led study shows

New study challenges classic tenet of memory research

NASA's Curiosity reaches Mars ridge where water left debris pileup

DOE backs Rice study of how soils store carbon

Powerful X-ray laser ushers in a new era of science

Combustion powers bug-sized robots to leap, lift and race

Have researchers found the missing link to make easy protein sequencing possible?

Scientists design ultrastable, high-energy-density Zn-Mn battery

Improving the properties of sweeteners for enhanced thermal energy storage



 


Editor & Publisher: Jose Villarreal
Art Director: Juan José Sepúlveda Ramírez



Tell a Friend
Dear User, please complete the form below in order to recommend the ResearchNews newsletter to someone you know.
Please complete all fields marked *.
Sending Mail
Sending Successful